Zum Hauptinhalt springen
Aufgrund des hohen Aufkommens kann sich die Zustellung Ihres Pakets verzögern

Vor 15:00 Uhr bestellt, heute versandt!

Bezahlen Sie nachträglich mit Klarna

Mehr als 25.000 Artikel

Vor 15:00 Uhr bestellt, heute versandt!

Bezahlen Sie nachträglich mit Klarna

Mehr als 25.000 Artikel

Woodburning a wood slice

Woodburning a wood slice

Turn your favourite design or drawing into a lasting piece of art on wood! With a
few simple steps, you can learn the basics of woodburning and bring your design
to life on a wood slice.


PDF herunterladen
1
Print out a design of your choice, sized to fit your wood. You can find the design for this project in the PDF on this page.
2
Flip the paper over and shade the back with a soft or graphite pencil, ensuring the entire back is covered with graphite.
3
Cut the design to fit the wood, and secure the paper with masking tape.
4
Trace over the design with a harder pencil, applying enough pressure to transfer the lines.
5
Remove the paper from the wood. The design should now be transferred onto the wood. If any lines are faint, go over them lightly with pencil.
6
Prepare your workspace and allow the woodburner to heat up fully. Use the fine tip to start burning the thinner lines or outlining larger areas.
7
For broader lines or larger areas, you can switch to a wider tip. Let the woodburner cool completely before changing the tip.
8
Finished woodburning? Lightly erase any remaining pencil marks, and if desired, apply a layer of varnish to complete your project.

YOU MAY ALSO like