Formas deco
Adornos
Herramientas de manualidades
Cuarto de manualidades
Decoración del hogar
Materiales para manualidades
Máquinas
Mixed media accesorios
Papel y Cartón
Plotters
Perforadoras
Suministros de pintura
Corte y embossing
Herramientas de corte
Sellos y Suministros
Material de dibujo y escritura
Textil
Pinturas, Tintas y MediosSaltar al contenido principal
Debido a la gran demanda, su paquete puede sufrir retrasos
Woodburning a wood slice
Turn your favourite design or drawing into a lasting piece of art on wood! With a
few simple steps, you can learn the basics of woodburning and bring your design
to life on a wood slice.
1
Print out a design of your choice, sized to fit your wood. You can find the design for this project in the PDF on this page.
2
Flip the paper over and shade the back with a soft or graphite pencil, ensuring the entire back is covered with graphite.
3
Cut the design to fit the wood, and secure the paper with masking tape.
4
Trace over the design with a harder pencil, applying enough pressure to transfer the lines.
5
Remove the paper from the wood. The design should now be transferred onto the wood. If any lines are faint, go over them lightly with pencil.
6
Prepare your workspace and allow the woodburner to heat up fully. Use the fine tip to start burning the thinner lines or outlining larger areas.
7
For broader lines or larger areas, you can switch to a wider tip. Let the woodburner cool completely before changing the tip.
8
Finished woodburning? Lightly erase any remaining pencil marks, and if desired, apply a layer of varnish to complete your project.
YOU MAY ALSO like
